CaTeFo Wireless Microphone UMic8 TX+RX
The CaTeFo UMic8 (TX+RX) is a portable, dual-channel, camera-mountable UHF wireless system that provides stellar, broadcast-quality sound and enables you to use clip-on lavalier mics on two separate people while only requiring you to attach a single ultra-compact receiver to your camera. This system is perfect for DSLR cameras, camcorders or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube videos and more. Every component features sturdy metal construction and delivers excellent sound quality in a low-cost package. The entire kit is ultra-compact, lightweight, and easy to bring with you on every shoot.
Features
· Dual-channel UHF wireless receiving technology for using two transmitters simultaneously
· Double-conversion DSP receiving processor for strong anti-mirror interference ability
· Professional-level circuit structure provides LOW-CUT low cut function.
· Stereo/Mono output
· Equipped with headphone output jack for real-time monitoring
· Mic in and Line in input switch
· WNCR noise control technology can suppress environmental noise and wind noise
· Provides up to 120 meter wireless frequencies
· Support external USB power supply
· Metal construction for excellent electrical characteristics and mechanical strength.
Specifications
| UMic8 RX Receiver | |
| Channels: | 100 selectable channels in 2 groups (A and B) |
| Wireless Frequency Range: | 505 MHz – 595 MHz |
| Oscillator Type: | PLL synthesizer |
| Output: | Locking 1/8” (3.5mm) TRS mini-jack |
| Antenna: | 1/4 λwire antenna |
| Audio Output Level: | -60 dBV |
| Headphone Output Level: | 30mW (16 ohm) |
| Sensitivity: | -95 dBm |
| Signal to Noise Ratio: | 70 dB or more |
| Voice Delay: | 12 ms |
| Reference Deviation: | +/- 5 kHz (-60 dBV, 1 kHz input) |
| Frequency Response: | 30 Hz to 18 kHz (+/- 3dB) |
| Distortion: | 0.5% or less |
| Spur Suppression: | -60 dBV |
| Batteries: | 2 LR6/AA size batteries or USB DC 3V |
| Dimensions: | 82 x 63 x 24 mm |
| Weight: | 5.29 oz (150g) (without batteries) |
| UMic8 TX Transmitter | |
| Channels: | 100 selectable channels in 2 groups (A and B) |
| Wireless Frequency Range: | 505 MHz – 595 MHz |
| Oscillator Type: | PLL synthesizer |
| Input: | Locking 1/8” (3.5mm) TRS mini-jack |
| Reference audio input level: | –60 dBV (MIC input, 0 dB attenuation) |
| Antenna: | 1/4 λwire antenna |
| Signal to Noise Ratio: | 70 dB or more |
| Voice Delay: | 12 ms |
| Reference Deviation: | +/- 5 kHz (-60 dBV, 1 kHz input) |
| Frequency Response: | 30 Hz to 18 kHz (+/- 3dB) |
| Distortion: | 0.5% or less |
| Spur Suppression: | -60 dB |
| Batteries: | 2 LR6/AA size batteries or USB DC 3V |
| Dimensions: | 82 x 63 x 20 mm |
| Weight: | 4.40 oz (125g) (without batteries) |